礦ision Build Log
Project:
C:\Users\netman\Documents\work\arm\STM32开发板\单机24L01通信\单机24l01通信.uvproj
Project File Date:  08/15/2014

Output:
Rebuild target 'Target 1'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_it.c...
compiling TEST.C...
compiling SPI.c...
compiling 24l01.c...
compiling usart.c...
compiling sys.c...
compiling key.c...
compiling delay.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_nvic.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_usart.c...
compiling stm32f10x_flash.c...
linking...
Program Size: Code=9408 RO-data=368 RW-data=16 ZI-data=1048  
FromELF: creating hex file...
".\output\单机24l01通信.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Users\\netman\\Documents\\work\\arm\\STM32开发板\\单机24L01通信\\output\\单机24l01通信.axf" 
Set JLink Project File to "C:\Users\netman\Documents\work\arm\STM32开发板\单机24L01通信\JLinkSettings.ini"
* JLink Info: Device "STM32F103RC" selected (256 KB flash, 48 KB RAM).
 
JLink info:
------------
DLL: V4.80g, compiled Feb 13 2014 20:50:02
Firmware: J-Link ARM V8 compiled Nov 25 2013 19:20:08
Hardware: V8.00
S/N : 17935099 
Feature(s) : RDI,FlashDL,FlashBP,JFlash 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103RC
VTarget = 3.274V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Application running ...