�Vision Build Log
Project:
E:\Starshine\USER\USART.uvproj
Project File Date:  08/27/2015

Output:
Build target 'Target 1'
compiling sentdata.c...
compiling MS5611.c...
..\HARDWARE\GY-86\MS5611.c(104): warning:  #177-D: variable "i2cret" was declared but never referenced
        uint8_t i2cret[2];
..\HARDWARE\GY-86\MS5611.c(230): warning:  #177-D: variable "AltPre" was declared but never referenced
        static float Altitude,AltPre;
..\HARDWARE\GY-86\MS5611.c(231): warning:  #177-D: variable "dz" was declared but never referenced
        float dz,dt;
..\HARDWARE\GY-86\MS5611.c(231): warning:  #177-D: variable "dt" was declared but never referenced
        float dz,dt;
..\HARDWARE\GY-86\MS5611.c(232): warning:  #177-D: variable "current" was declared but never referenced
        uint32_t current=0;
..\HARDWARE\GY-86\MS5611.c(233): warning:  #177-D: variable "tp" was declared but never referenced
        static uint32_t tp=0;
..\HARDWARE\GY-86\MS5611.c(19): warning:  #177-D: variable "Now_doing" was declared but never referenced
  static uint8_t  Now_doing = SCTemperature;    //当前转换状�?                  ^
..\HARDWARE\GY-86\MS5611.c(21): warning:  #177-D: variable "Current_delay" was declared but never referenced
  static uint32_t Current_delay=0;          //转换延时时间 us 
..\HARDWARE\GY-86\MS5611.c(22): warning:  #177-D: variable "Start_Convert_Time" was declared but never referenced
  static uint32_t Start_Convert_Time; //启动转换时的 时间 us 
..\HARDWARE\GY-86\MS5611.c(55): warning:  #550-D: variable "Press_buffer" was set but never used
  static float Temp_buffer[MOVAVG_SIZE],Press_buffer[MOVAVG_SIZE],Alt_buffer[MOVAVG_SIZE];
..\HARDWARE\GY-86\MS5611.c: 10 warnings, 0 errors
linking...
Program Size: Code=32640 RO-data=3992 RW-data=264 ZI-data=2096  
FromELF: creating hex file...
"..\OBJ\USART.axf" - 0 Error(s), 10 Warning(s).
Load "..\\OBJ\\USART.axf" 
Set JLink Project File to "E:\Starshine\USER\JLinkSettings.ini"
* JLink Info: Device "STM32F103RC" selected (256 KB flash, 48 KB RAM).
 
JLink info:
------------
DLL: V4.80g, compiled Feb 13 2014 20:50:02
Firmware: J-Link ARM V8 compiled Nov 25 2013 19:20:08
Hardware: V8.00
S/N : 17935099 
Feature(s) : RDI,FlashDL,FlashBP,JFlash 
 
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103RC
VTarget = 3.319V
State of Pins: 
TCK: 0, TDI: 0, TDO: 1, TMS: 1, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 4000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Application running ...